Certificate III in Irrigation Technology AHC32422 - Expressions of Interest
Who is the course for?
Our Certificate III in Irrigation Technology is designed for candidates with limited experience in the field of irrigation, who are looking to kick-start a career in an essential growth industry with ongoing job opportunities and government support for eligible students.
Units of Competency
Core Units
- AHCWHS301 Contribute to work health and safety processes
- AHCIRG337 Measure irrigation delivery system performance
- AHCIRG338 Troubleshoot irrigation systems
- AHCIRG339 Monitor soils under irrigation
- AHCIRG340 Install irrigation pumps
- AHCIRG342 Interpret irrigation plans and drawings
- AHCIRG345 Install pressurised irrigation systems
- AHCINF304 Install and terminate extra low voltage wiring systems
- AHCWRK309 Apply environmentally sustainable work practices
Elective Units
- AHCDRG306 Measure drainage system performance
- AHCIRG328 Operate irrigation controller and sensor technology
- AHCIRG341 Operate and maintain irrigation pumping systems
- AHCIRG344 Implement an irrigation schedule
- AHCIRG346 Operate pressurised irrigation systems
- AHCIRG347 Maintain pressurised irrigation systems
- AHCIRG349 Recommend irrigation products and services
- AHCWRK305 Coordinate worksite activities
- CPCPCM2043 Carry out WHS requirements
- CPCPCM3023 Fabricate and install non-ferrous pressure piping*
- CPCPWT3027 Install backflow prevention devices
- CPCPIG2021 Design domestic urban irrigation systems
- PMBWELD301E Join polyethylene pipelines using butt welding
- PMBWELD302E Join polyethylene pipelines using electrofusion welding
*prerequisite unit for CPCPWT3027 Install backflow prevention devices.
How to Study
Mode of Delivery
The Course will be delivered via a blend of:
- Virtual Classroom
- Face-to-Face
- Online Post-Course Assessments
- Workplace Activities
Course Program & Duration
The Course is delivered over 4 blocks within an 18 month period and must be completed within 24 months from enrolment.
- Introduction: 1 x 2 hour Virtual Session
- Block 1: 5 days Face-to-Face training
- Block 2: 3 x 4 hour Virtual Sessions
- Block 3: 5 days Face-to-Face training
- Block 4: 4 days Face-to-Face training
Virtual Classroom Sessions will be delivered in 2 consecutive sessions per week and run from 9:30am - 1:30pm AEST (Brisbane Time). The times may change depending on the location of students.
Face-to-Face Block training will run from 8:30am - 4:30pm (local time).
Course Fees
| |
|
Company Member |
|
Individual Member |
|
Non-Member |
|
| Full Course |
|
$8,350 |
|
$9,185 |
|
$10,103.50 |
|
| Per Block* |
|
$2,087.50 |
|
$2,296.25 |
|
$2,525.87 |
|
Our Certificate III in Irrigation Technology is delivered over 4 blocks, which are delivered both virtually and face-to-face. During the face-to-face blocks, student's are required to attend a a full week of training in the State that they are enrolled in (i.e.. NSW, QLD, SA, etc.) To ensure that these face-to-face sessions are accessible and convenient for all of our students, we are trying to determine the most suitable locations for our Certificate III in Irrigation Technology across Australia.
Registration for this expression of interest is free. As part of the registration, you will be asked to provide the preferred region you are interested in attending your face-to-face sessions. Once we have received your response, someone from our Training team will reach out to you and provide you with some more information and dates if available.
Your feedback is invaluable and will play a crucial role in shaping the delivery of our program. For any funding enquiries, please contact us at [email protected]